Grain Bin Unloads & Sweeps

A true zero-entry sweep system that handles the extreme demands of commercial grain handling applications. Available for grain bins up to 139 foot diameter. Patented above floor electrical collector ring and auto advance sweep controls allow the sweep to be wired permanently and controlled from outside the bin.

An award-winning, complete bin unloading solution designed to bridge the gap between traditional power sweeps and commercial under-bin systems, delivering up to 6,500 BPH in a simple, low-maintenance design. It fits bins up to 93 feet in diameter and installs under dryer floors as low as 13 inches. Patent pending.

Our 10″ & 12″ u-trough power sweeps feature high capacities and long-run durability. Available for bins from 18 to 80 feet in diameter. The 12 inch systems handle up to 10,000 bushels per hour; 10 inch systems offer capacities to 6,000 bushels per hour. Both systems can be installed in 13 inch dryer floor support applications.

Sudenga’s 8″ & 10″ round tube power sweeps are available for bins or silos to 80’5″. Standard features include heavy duty gearboxes, galvanized underbin tube and a sweep backshield. Designed for trouble-free installation for the bin or silo erector, long-term reliability and easy maintenance. Installs in dryer floor or concrete floors with a trench.

Sudenga’s removable bin sweeps can be configured for use in multiple bins. Make easy work of cleaning your bins with a Sudenga bin sweep. Available for 6, 8, and 10 inch underbin systems for bins up to 49′ 6″ in diameter. The modular design fits a variety of bin sizes. Mix a basic section with extensions as necessary to fit multiple bin diameters.

Sudenga’s Series 1 sweep augers are the economical workhorse of our line of commercial bin augers. Sudenga’s 7-1/4 inch sweeps handle up to 2,050 bushels per hour; 9-1/4 inch sweeps handle up to 3,700 bushels per hour and 11-1/4 inch handle up to 5,900 bushels per hour. Sweeps available for bins up to 80 feet in diameter.

Complete underbin systems for concrete or dryer floor bins to 49′ 6″ in diameter. Underbin systems are available in diameters of 6, 8 and 10 inches. Shipped complete with center and intermediate sumps, control rods and bin wall plates. Concrete and dryer floor applications both available. Capacities range from 1,000 bushels per hour to 3,800 bushels per hour, depending on which power head is ordered.

Complete commercial underbin round tube (8, 10, and 12 inch) auger systems for bins up to 80 feet in diameter for dryer or concrete bin floor applications. Capacities range from 2,400 to 5,600 bushels per hour depending on which power head is ordered. Flanged galvanized tube comes standard.

Bin unloads available in three formats: horizontal, inclined, and vertical. Our powerheads are designed for convenience and durability. Unload options available for complete bin unload systems and power sweeps. Sleeve mount or flange mount styles. All include the tube, flight, motor mount, belts, belt guard, pulleys and connector shafts.

Sudenga offers three styles of commercial unloading heads: Flange-mount Horizontal, 27° Incline or Double Drive Vertical style. All auger powerheads include necessary tubes, flights, motor mount, belt(s), belt guard, pulley(s) and connector shafts. 27° Incline features an oversized transition boot with heavy knuckle and bronze hanger bearing for maximum capacity and reliable service.

Single to three phase conversion for grain bins enables you to convert 230 or 480 volt single phase to 230 or 480 volt three phase. Able to withstand northern winters and southern summers as well as the conditions on a typical Midwestern farm, the Sudenga Phase Conversion Panels resist dust, heat, UV sun, rain, snow, freezing and other harsh conditions.