Figure the HP requirements for your incline drag conveyor.
		Enter the required values in the red cells below.
1.	Determine the overall length of the conveyor, including the curve section.
	The total length of the conveyor X the BPH divided by 55,000 =HP
		Length ft.		BPH	HP
			Required bushel per hour, corn
2.	Determine the discharge height in feet and multiply by the BPH desires.
	Divide the result by 26,500= HP
		Height ft		BPH	HP
			Required bushel per hour, corn
3.	If a curve section is used, divide the BPH by 1325
	If no curve is used ignore this step and leave value at "0".
		BPH		BPH	HP
			Required bushel per hour, corn
				Total HP
Above HP is raw, required horsepower. Round UP to the next size motor. Due to differences in math processors, we cannot guarantee calculations will be exact. If you need an exact calculation, contact the Sudenga Engineering Department at 1-888-783-3642 with your questions.