Find a Dealer

Grain Handling Equipment

You’re not handed a reputation for service, innovation and durability - you earn it. And since 1888, Sudenga Industries has earned a reputation for providing the commercial and agricultural community with quality service and durable ag equipment for grain, feed and seed handling applications. Sudenga's grain handling product line includes: portable augers, bucket elevators, chain conveyors, grain bin augers and sweeps, round tube augers, and u-trough augers, and more. Browse our items by product or product category then find a Sudenga dealer near you or contact us to find out more about our grain handling equipment.

Subscribe to our grain handling equiment email newsletter.

11,000 BPH Super Scoop

Piles of grain to pick up? Sudenga has the solution.

Load a waiting 1,000 bushel trailer in 6 minutes with the 11,000 BPH Super Scoop. Available in standard or center feed models. Easy to mount and dismount. Fits most tractors 90 HP and up. Attach a hydraulic spout for more efficient and precise loading.

Read More
20,000 BPH Ultra Scoop

Pick up millions of bushels of grain fast with Sudenga's 20,000 BPH Ultra Scoop.

Loads a typical grain trailer from your flat storage pile in as little as 3 minutes. Fits most tractors. Recommended mounting on 150 HP tractors and up. The Ultra Scoop features a 16' long by 16" diameter horizontal pick up auger with a 6' detachable wing.

Read More
Big Hi-Efficiency Portable Auger (to 122’ in Length)

Have some grain to spare? The Big Hi-Efficiency could use a snack.

Loading a large bin? Piling grain in flat storage? Looking for high capacity and extreme reliability? This one will do just fine. The Big Hi-Efficiency portable auger is available in lengths of 92', 102', 112', and 122'. It’s a big auger, and it’s hungry. Just don’t expect it to wear a jacket and tie to dinner.

Read More
Bin Roof Augers

Roof augers move the fill point down to the bin eave in limited access areas.

6, 8 and 10” diameter augers fit bins from 18 to 60’ in diameter. A hopper with lid, discharge spout and auger mounting brackets are included.

Read More
Bin Sweep Augers

Sudenga's removable bin sweeps can be configured for use in multiple bins.

Make easy work of cleaning your bins with a Sudenga bin sweep. Available for 6", 8", and 10" underbin systems for bins up to 49'6" in diameter. The modular design fits a variety of bin sizes. Mix a basic section with extensions as necessary to fit multiple bin diameters.

Read More
Bucket Elevators / Grain Legs

The difference is in the details. Sudenga bucket elevators are designed and built to exacting specifications giving the owner a system that will provide more years of service, with less downtime and repair. Sudenga elevator legs produce advertised capacities with extreme reliability. All welded construction. Painted or hot-dipped finish.

Read More
Clean Floor Attachment

Sudenga Industries introduces the latest in power sweep attachments. Clean closer to your floor, and leave less grain along your bin wall with our new Clean Floor Attachment! Work smart, not hard. The Clean Floor Attachment is standard on all Sudenga 10" and 12" Power Sweeps. Available as an option for 8" Power Sweeps.

Read More
Container Loaders

Load shipping containers quickly and easily with container loaders from Sudenga Industries. Available in portable or stationary configurations, Sudenga Container Loaders are available for 20' and 40' containers. Ideal for loading grain or any other free-flowing commodity.

Read More
Double Barrel Chain Conveyor

The Double Barrel chain conveyors have the benefits of a traditional chain conveyor (durability, low horsepower consumption and great capacity), but can be installed anywhere a traditional auger, air system or drag chain conveyor might be installed. Available with capacities up to 10,000 bushels/hr. The system is totally modular so lengths can be tailored to the specific application.

Read More
Drive Over Hopper

Don’t tell the Ox it looks handsome.
The Drive Over Hopper is here to unload grain, not win a fashion show.

Unload from hopper bottom trailers and gravity wagons quickly and easily. Available with electric or hydraulic drive options this low profile (9-3/4") hopper can unload up to 7,500 BPH. Heavy-duty ramps are spring assisted for ease of set-up and knock down.

Read More
Drive Over Hopper 125

Big, fast and portable. Careful, the neighbors are bound to stare.
The Portable Drive Over Hopper 125 (PDOH 125) is ready to get to work.

Unload your grain from trucks and trailers quickly and easily. This low profile portable grain hopper can unload at up to 12,500 bu/hr. Drive over with virtually any standard grain trailer or wagon.

Read More
Hi-Efficiency Portable Auger (to 82’ in length)

This is the Ox Hi-Efficiency series. It’s busy working right now.

The Hi-Efficiency portable auger features a versatile hydraulic scissor lift, bottom drive PTO, and gimbal mount hinged hopper. Up to 82' long, and capacities up to 7,000 bushels per hour. If you're looking to goof around, keep looking. Available in painted or galvanized finishes.

Read More
Horizontal Drag Chain Conveyors

Horizontal drag chain conveyors feature low horsepower requirements per bushel compared to an auger. Minimal long term maintenance and durability are characteristics of a drag conveyor. Overhead, on-grade or underground, drag chain conveyors are a great choice.

Read More
Incline Drag Chain Conveyors

Incline drag chain conveyors are ideal for conveying grain from pits to legs, underground or overhead... wherever high capacities are required. Drag conveyors feature low-maintenance and low horsepower requirements per bushel compared to an auger. Galvanized construction and multiple inlet/outlet configurations ensure ease of installation and use for years to come.

Read More
Low-Profile Chain Conveyors

Sudenga's innovative low-profile conveyors feature big capacity with the advantage of minimized installation cost and the long-term durability of drag conveyors. Great in retrofit applications where space or ground water is an issue. Originally developed to feed bucket elevators from shallow drive over pits, thousands of applications later these units can be found loading out to semi-trailers or returning grain to the leg from a low clearance loadout.

Read More
Model TD-450 Portable Auger

There’s work to do. The Ox Top Drive Series is a beast.

The TD-450 (Top Drive) Ox portable auger features multiple drive options, including electric, PTO, hydraulic, and gas engine. Available in tube diameters of 6", 8", 10", 12" and 14". Standard cage intake, optional 17° hopper. Let it load and unload your grain bins. Let it fill or take away from your dryers. Just let it work.

Read More
Phase Conversion Panels

Single to three phase conversion for grain bins. Convert 230 or 480 volt single phase to 230 or 480 volt three phase. Able to withstand northern winters and southern summers as well as the conditions on a typical midwest farm, like dust, heat, UV sun, rain, snow, freezing, etc

Read More
Power Sweeps, Round Tube (8”, 10”)

Sudenga's round tube power sweeps are available for bins or silos to 80' 5".

Standard features include heavy duty gearboxes, galvanized underbin tube and a sweep backshield designed to stay straight in the toughest conditions. Our sweeps are designed for trouble-free installation for the bin or silo erector, long term reliability and easy ongoing maintenance. Installs in dryer floor or concrete floors with a trench.

Read More
Power Sweeps, U-Trough (10”, 12”)

Our u-trough power sweeps feature high capacities and long-run durability.

Our 10" and 12” u-trough power sweeps are available for bins from 18 to 80’ in diameter. 12” systems handle up to 10,000 BPH in capacity. 10” systems offer capacities to 6,000 BPH. Both systems can be installed in 13" dryer floor support applications.

Read More
Round Tube Augers (6”, 8”, 10”, 12”, 14”)

Point A to B in an economical way, Sudenga round tube augers are available in 6", 8", 10", 12" and 14" diameters. For commercial or standard duty applications.

Read More
Shallow Double Drive Over Receiving Pit

Receive from both hoppers of a trailer at the same time with Sudenga's patented Shallow Double Drive Over Receiving Pit. Capacities up to 17,500 BPH and the low-profile design make this chain conveyor system a versatile solution.

Read More
Stop Assist

Eliminate climbing in and out of the truck to reposition. Remove the need for an extra person. The Stop Assist will help you stop right on the target each and every time. Use the Stop Assist on grain handling equipement, feed trucks and trailers, railcars, cement trucks, on construction sites or anywhere you have to align equipment on a regular basis.

Read More
Support Tower, Catwalk, Leg Accessories

Sudenga is your one stop source for complete grain leg systems. Support equipment includes: elevator leg support towers in all common sizes, super span catwalk, 40 degree and 60 degree flat back and full round distributors, spouting and truss kits, rack and pinion gates, elbows, transitions, hoppers, deadheads, and more.

Read More
Truck Hopper

No-nonsense. This Truck Hopper doesn’t mess around.

Short elevation and high capacities situation? Try the Ox Truck Hopper on for size. 6' or 8' incline tubes and capacities up to 6,500 BPH. It’s versatile and it’s well-balanced. Available in electric or hydraulic drive. It gets in, and then it gets out. No funny business.

Read More
U-Trough Augers

Sudenga u-trough augers are available in 6”, 8” 10”, and 12” diameters.

Wood block hanger bearings provide quiet operation, long flighting life, and easy maintenance/replacement. Bolt-on hip roof trough cover is standard equipment, keeping these covers in place at all times. U-trough augers are available with three styles of direct drive, chain reduction drives, and helical gear drive.

Read More
Underbin Systems (6”, 8”, 10”)

Complete underbin systems for concrete or dryer floor bins to 49' 6" in diameter.

Underbin systems are available in diameters of 6", 8", and 10". Shipped complete with center and intermediate sumps, control rods, and bin wall plates. Concrete and dryer floor applications both available. Capacities range from 1,000 BPH to 3,800 BPH depending on which power head is ordered.

Read More
Unloading Heads

Bin unloads available in three formats: horizontal, inclined, and vertical.

Our powerheads are designed for convenience and durability. Unload options available for complete bin unload systems and power sweeps. Sleeve mount or flange mount styles. All include the tube, flight, motor mount, belt(s), belt guard, pulley(s), and connector shafts.

Read More
[MAX] Commercial Bucket Elevators

Sudenga Industries puts over 125 years of knowledge and engineering experience to work when it comes to providing bucket elevators for a variety of industrial materials. Frac sand, wood chips and ground rubber are just a few of the materials currently being handled worldwide by Sudenga industrial bucket elevators.

Read More
[Max] D Series Grain Bin Sweeps

Sudenga Max Commercial Equipment Line.

The zero-entry "D" Series sweeps (D100 & D150) from Sudenga Max are engineered to handle the most demanding environments at the bottom of grain bins up to 150' tall. Available with motorized push tractor or track drive options and in capacities up to 10,000 BPH.

Read More
[MAX] Extend-A-Sweep

Sudenga Max Commercial Equipment Line.

A zero entry sweep for grain bins to 150+ feet in diameter. The Sudenga Extend-A-Sweep is the most innovative commercial bin sweep on the market today. Core the bin on the first pass and sweep extends to the wall on the second pass. Extending sweep can even sweep square or rectangular floors.

Read More
[MAX] Horizontal Drag Chain Conveyors

Sudenga Max Commercial Equipment Line.

Horizontal drag chain conveyors feature low horsepower requirements per bushel compared to an auger. Minimal long term maintenance and durability are characteristics of a drag conveyor. Overhead, on-grade or underground, drag chain conveyors are a great choice.

Read More
[MAX] Incline Drag Chain Conveyors

Sudenga Max Commercial Equipment Line.

Incline drag chain conveyors are ideal for conveying grain from pits to legs, underground or overhead...wherever high capacities are required. Drag conveyors feature low-maintenance and low horsepower requirements per bushel compared to an auger. Galvanized construction and multiple inlet/outlet configurations ensure ease of installation and use for years to come.

Read More
[MAX] Low-Profile Chain Conveyors

Sudenga Max Commercial Equipment Line.

Capacities to 10,000 BPH. Sudenga's Innovative low-profile conveyors feature big capacity with the advantage of minimized installation cost and the long-term durability of drag conveyors. Great in retrofit applications where space or ground water is an issue. Originally developed to feed bucket elevators from shallow drive over pits, thousands of applications later these units can be found loading out to semi-trailers or returning grain to the leg from a low clearance loadout.

Read More
[MAX] Motorized Push Tractor

Sudenga Max Commercial Equipment Line.

Keep personnel out of the grain bin! Motorized push tractors are standard equipment on most Sudenga commercial sweeps, but can also be purchased for retrofit applications of sweeps in the field.

Read More
[MAX] Series I Grain Bin Sweep

Sudenga Max Commercial Equipment Line.

Series I commercial sweeps for bins to 80' dia. are available in 8", 10", and 12" sizes. Capacities from 2050 to 5900 BPH. The Series I is the economical workhorse of Sudenga's line of commercial sweeps.

Read More
[MAX] Shallow Double Drive Over Receiving Pit

Sudenga Max Commercial Equipment Line.

Receive from both hoppers of a trailer at the same time with Sudenga's one-of-a-kind shallow receiving pit. With capacities up to 17,500 BPH and a low-profile completely modular design, this conveyor system a versatile solution. Even more, the patented Shallow Double Drive Over Receiving pit can be installed under a truck scale or in a shallow trench (often less than 4’ deep).

Read More
[MAX] Support Tower, Catwalk, Leg Accessories

Sudenga is your one stop source for complete industrial elevator leg systems. Commerical bucket elevator support equipment includes: elevator leg support towers, super span catwalk, 40 degree and 60 degree flat back and full round distributors, spouting and truss kits, rack and pinion gates, elbows, transitions, hoppers, deadheads, and more.

Read More
[MAX] Underbin Auger System

Sudenga Max Commercial Equipment Line.

Durable but economical, commercial underbin auger systems are available in diameters of 8", 10", and 12". Systems offer center and intermediate sumps, control rods, and bin wall plates. Complete systems for concrete and dryer floor applications.

Read More
[MAX] Unloading Heads

Sudenga Max Commercial Equipment Line.

Flange mount Horizontal, 27° Incline or Double Drive Vertical style head sections available. All include necessary tubes, flights, motor mount, belt(s), belt guard, pulley(s), and connector shafts. 27° Inclines feature an oversized transition boot with heavy knuckle and bronze hanger bearing for maximum capacity and reliable service.

Read More