Model TD-450 Portable Auger

Find a Dealer
There’s work to do. The Ox Top Drive Series is a beast.
The TD-450 (Top Drive) Ox portable auger features multiple drive options, including electric, PTO, hydraulic, and gas engine. Available in tube diameters of 6", 8", 10", 12" and 14". Standard cage intake, optional 17° hopper. Let it load and unload your grain bins. Let it fill or take away from your dryers. Just let it work. Available in painted or galvanized finishes.
6", 8", 10", 12" and 14" diameter tubes
Painted finish available in all sizes
Galvanized tube finish available on sizes 6", 8", 10"
A-frame transport with manual winch
Hydraulic winch; 12'' & 14" augers
PTO, electric, gas, and hydraulic drives
6" Augers | 1,200-1,400 BPH |
8" Augers | 2,100-2,400 BPH |
10" Augers | 3,200-3,600 BPH |
12" Augers | 5,000-5,400 BPH |
14" Augers | 10,000-11,000 BPH |
6" Augers | 8" Augers | 10" Augers | 12" Augers | 14" Augers | |
---|---|---|---|---|---|
Tube Gauge | 14 ga. | 14 ga. | 12 ga. | 12 ga. | 12 ga. |
Finish | Painted or Galv. | Painted or Galv. | Painted or Galv. | Painted | Painted |
Flight Ga.* | 10 ga. | 3/16" | 3/16" | 1/4" | 5/16" |
Tube ID | 1" | 1½" | 2½" | 2 7⁄8" | 2 7⁄8" |
Driveshaft Diameter | 1" | 1" | 1¼" | 1¼" | 1¼" |
Head Chain |
Single #50 (all lengths) |
Single #60 (all lengths) |
Single #80 (all lengths) |
Single #80
Double #80 |
Double #80 (31'-41')
Belt Drive |
Gearbox** Shaft Diameter | 1¼" | 1¼" | 1¼" |
1¼" (31'-41') 1½" (51'-71') |
1½" |
Transport Arms |
1 7⁄8" round tube (26'-36') 2" x 4" box upper & 2" x 3" box lower (41'-71') |
1 7⁄8" round tube (26'-36') 2" x 4" box upper & 2" x 3" box lower (41'-71') |
17⁄8" round tube (26'-36') 2" x 4" box upper & 2" x 3" box lower (41'-71') |
2" x 4" box upper & 2" x 3" box lower (all lengths) |
2" x 4" box upper & 2" x 3" box lower (all lengths) |
Transport Width |
7' 8" (26'-41') 10' (51'-71') |
7' 8" (26'-41') 10' (51'-71') |
7’ 8" (26'-41') 10' (51'-71') |
7' 8" (31'-41') 10' (51'-71') |
7' 8" (31'-41') 10'*** (51'-86') |
* Intakes on all augers are double flighted.
** Gearbox is a right angle type, with miter cut gears and 1:1 ratio.
*** Axles extend to 13' for loading grain
HOPPER DIMENSIONS (17° OR HINGED)
Tube Dia. | Length | Width | Depth |
---|---|---|---|
8" | 28" | 27" | 10" |
10" | 32½" | 26½" | 11¾" |
12" | 32½" | 26½" | 13" |
14" | 38½" | 32" | 15" |
RECOMMENDED HORSEPOWER (CALCULATED AT 40° AUGER INCLINE)
* First HP is for dry corn. Second HP is for slow down kit.
** Calculated assuming tractor hydraulics put out 14 GPM (determines auger RPM) and maximum of 1800 PSI for H series motors. Also assuming 14 GPM (determines auger RPM) for the 2000 series but with a maximum of 3000 PSI.
Auger Length | |||||||||
---|---|---|---|---|---|---|---|---|---|
26' | 31' | 36' | 41' | 51' | 56' | 61' | 66' | 71' | |
A - Elevation | 16' | 19' | 23' | 26' | 31' | 35' | 38' | 41' | 44' |
B - Reach | 7' | 10' | 11' | 14' | 15' | 18' | 20' | 21' | 24' |
C - Height | 12' | 13' | 15' | 16' | 20' | 21' | 23' | 25' | 26' |
D - Distance | 14' | 15' | 17' | 18' | 25' | 26' | 28' | 30' | 31' |
17° or hinged hopper with removable hitch
Swivel transport
Wheeled jack
Plastic hopper
Hydraulic winch for 8'' & 10'' auger
Ready to visit with someone about your portable auger needs?
Contact us or find a dealer near you to get started.