11,000 BPH Super Scoop

Find a Dealer

Piles of grain to pick up? Sudenga has the solution.

Load a waiting 1,000 bushel trailer in 6 minutes with the 11,000 BPH Super Scoop. Available in standard or center feed models. Easy to mount and dismount. Fits most tractors 90 HP and up. Attach a hydraulic spout for more efficient and precise loading.

 

SaveSave

Load piles from flat storage quickly and easily with the 11,000 bushels per hour Super Scoop from Sudenga. The 16" diameter x 10' long intake auger feeds an incline conveyor making quick work of grain pile clean up.

 

Easy to mount and dismount

35' and 40' inclined convey-or (center feed and stan-dard scoop)

Heavy duty throughout

Load a waiting 1,000 bushel trailer in under 6 minutes

11,000 BPH

16” diameter intake auger

 

Scoop Blade

3/16” blade thickness; 10’ wide on standard models; 8’ wide on center feed models; 16” helicoid flighting (5/16” thick) on 4” pipe (¼” wall); Double #80 roller chain; pillow block bearings; 122 RPM flight speed; attachment arms for Category III 3-point

Inclined Conveyor

10 ga. abrasion resistant steel lower trunking and pan; 1” flame cut sprockets on 2 7/16” top and bottom shafts; 42,000# tensile strength chain; ½” UHMW paddles; 400 ft./min. chain speed; 12” canvas spout

Undercarriage

Standard scoops only; castoring wheels; hydraulic lift; 3-point attachment to tractor; undercarriage supports conveyor when not on the tractor; 11L15 implement tires.

Tractor Specifications

Fits most late model tractors 90 HP or more (540 RPM PTO speed); Category III 3-point is standard; Category II requires special mounting pins

On 40' standard scoops: (conveyor outside tire) the distance from the three-point to the lead edge of the front tire cannot exceed 175”; distance from the tractor PTO to the end of the axle (outside the tire) cannot exceed 55”

On 35' center feed scoops: (conveyor inside tire) the distance from the centerline of the tractor to the centerline of the conveyor is 24”; conveyor is 14” wide

 

Reach and Elevation

Standard

Center Feed

Discharge Height* 11 ½' - 21 ½' 10' - 18 ½'
Discharge Reach* 19' - 14' 15' - 11'
Transport Height 13 ½' 13 ½'

*Lowest (16°) and highest (32°) inclines.

 

Hydraulic Spout: Power rotation for the pan spout. This option also raises and lowers the spout.

Dump Hopper: For standard scoops only. Bolt-on panel forms a trough on the blade for unloading from trucks or wagons.

 

SaveSave